CN
EN
Service hotline:
Wechat number：
National Service Hotline
-
What are the precautions for valve plate spraying
Valve plate spraying is a job that requires correct operation. Here are some precautions: 1、 In terms of preliminary preparation 1. Surface treatment Cleaning: The surface of the valve plate must be cleaned to remove impurities such as oil stains, rust, and old paint layers. Specialized cleaning agents, such as metal oil stain cleaners, can be used to clean by soaking, wiping, or rinsing.
Learn more -
What are the characteristics of tightly lined PTFE board
Tightly lined PTFE sheets have the following characteristics: 1、 Good corrosion resistance 1. Resistance to chemical erosion Tightly lined PTFE sheets have strong resistance to the vast majority of chemicals. Both strong acids (such as sulfuric acid, hydrochloric acid, nitric acid, etc.), strong bases (such as sodium hydroxide, potassium hydroxide, etc.), and various organic solvents (suc
Learn more -
What are the characteristics of semiconductor duct spraying
Semiconductor duct spraying has the following characteristics: 1. High corrosion resistance: During the semiconductor production process, acidic and alkaline corrosive gases such as sulfuric acid, hydrochloric acid, hydrofluoric acid, chlorine gas, and ammonia gas are generated, so the corrosion resistance requirements for air ducts are relatively high. Spray coating materials usually have
Learn more -
What are the characteristics of spraying alumina coating on lithium battery equipment
The spraying of alumina coating on lithium battery equipment has the following characteristics: 1. Good thermal stability: Aluminum oxide has a high melting point and can maintain stable structure and properties even in high temperature environments. During the operation of lithium batteries, a certain amount of heat is generated, especially when used in rapid charging and discharging or hi
Learn more -
Introduce the nine operating steps of ptfe lining
With the continuous improvement of high temperature resistance and corrosion resistance requirements of materials, ptfe lining has gradually entered people's field of vision.
Learn more -
What kind of benefits does Suzhou Teflon spray bring to the surface of the workpiece
Teflon coatings are widely used in metallurgy, petroleum industry, natural gas extraction, aerospace and other industrial fields.
Learn more -
Why ECTFE spraying will receive the attention and attention of many industries
Through simple ECTFE spraying, all kinds of machined parts can have low friction coefficient and high wear resistance
Learn more -
Halar spraying that can effectively extend the service life of metal materials
We found through the later use process that we can find that the metal materials that have been sprayed by halar will have a relatively large improvement in the service life and applicability
Learn more -
Take a closer look at the connection between everyday electrical appliances and halar spraying
With the continuous improvement of halar spraying technology, the application range has also changed from industrial production to daily life.
Learn more -
What is the difference between halar spraying and ordinary spraying
In fact, from the name, we found that it is naturally impossible to be ordinary spray paint. Whether it is the selection of spray materials
Learn more
Service hotline：0512-69211270
Company address：1188 CUIZHOU Road, Lili Town, Wujiang District, Suzhou
contacts：Deng Guangcai 13912602396
contacts：Long Yanqiao 15995489385
Add wechat
Contact us
Telephone consultation